Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

lab-grown-padparadscha-round-cut

Lab Grown Padparadscha Sapphire Round Cut Wholesale: First

Holycome Trade Desk · November 18, 2026 · 6 min read

Start with fewer SKUs than you think. Here is the SKU count, size mix and reorder math a small retailer needs for lab grown padparadscha sapphire round.

Lab Grown Padparadscha Sapphire Round Cut Wholesale: First

The Number Most Small Retailers Get Wrong

I have watched a lot of first orders come through our floor in the past twelve years, and the mistake is almost always the same. A retailer buys eight or ten SKUs of lab grown padparadscha sapphire round cut wholesale in one go, spreads the money thin across sizes, and then sits on inventory that does not match what customers actually ask for. The stones are fine. The buying plan is not.

Here is the working number I give buyers who ask me directly: start with three SKUs, not ten. Three sizes, one color grade band, one cut. That is enough to test demand, keep cash free, and still qualify for sensible pricing. Below I will show you why that number holds up on a real production line and how to build the reorder rhythm around it.

Why Three SKUs Beats Ten on the First Order

Round cut padparadscha is a color-driven sale. The buyer at the counter is not comparing ten sizes; they are looking at one stone and deciding whether the peach-pink balance feels right. That means your SKU count should follow the sizes your setting line actually uses, not a catalog page.

Three SKUs usually means one small accent size, one center size for rings and pendants, and one larger statement size. If you carry 5mm, 7mm and 9mm rounds, you cover studs, solitaires and dress pieces with almost no overlap. Ten SKUs means you are holding dead weight in sizes that sell twice a year.

What the three SKUs should be

  • 5mm round: accent work, halo melee, earring pairs
  • 7mm round: the volume seller for solitaire rings and pendants
  • 9mm round: statement pieces, higher ticket, slower turns

If your shop leans bridal, push the middle size harder and keep the 9mm to a token quantity. If you sell mostly fashion jewelry, flip it and keep more 5mm pairs. The three-SKU frame stays; the weighting inside it changes.

MOQ Reality: Stock Versus Custom

This is where most buyers get confused by trading companies that quote one blanket minimum. Our rules are simple and they are the reason small retailers can start at all.

Stock sizes in standard grades ship from one piece. Custom cutting, meaning a size or color grade we do not hold, starts at 30 pieces per SKU. That split matters because your first three SKUs should all be stock sizes. You get to test the market without committing to thirty of anything.

Order typeMOQ per SKUProduction timeCertificatePayment
Stock round, standard grade1 pcShips in 3-5 daysGRAPayPal for samples, T/T for balance
Stock round, premium grade1 pcShips in 3-5 daysGRA + IGI on requestPayPal or T/T 30% deposit
Custom size or color match30 pcs12-18 daysGRA + IGIT/T 30% deposit, balance before ship
Custom setting-ready matched pairs30 pairs12-18 daysGRA + IGIT/T 30% deposit

Notice the certificate column. GRA is the standard lab-grown report most US and EU buyers accept at the counter level. IGI costs more and takes longer to paper, so we quote it on premium and custom lots where the buyer needs the stronger document for resale or insurance.

The Cost Math Behind a Three-SKU Start

Say you take 20 pieces of 5mm, 30 of 7mm and 10 of 9mm. That is 60 stones across three SKUs, a first order small enough to move through customs and your own shelf without stress, and large enough to get a real wholesale tier.

On a custom lot of 30 pieces per SKU, the same money buys you 90 stones but locks you into one size each. That is the wrong trade for a first order. Run stock first, read your sell-through for six to eight weeks, then convert your winning size into a custom run at the 30-piece minimum.

Rule of thumb from the floor: your first order should be small enough that a slow month does not hurt, and specific enough that a good month tells you exactly what to reorder.

Lead Times and What Actually Causes Delay

Stock ships in three to five working days. Custom production runs 12-18 days, and that window is real, not padded. The delays I see are almost never cutting time. They are color matching on custom lots, where the buyer wants ten stones to look identical under daylight, and certificate paperwork when IGI is added.

Delivery to the US and EU runs 5-8 days on DDP terms, which means duty and clearance sit with us, not with your customs broker. You get a landed cost, not a surprise invoice.

Where our 20% edge comes from

Our cost, speed and yield run roughly 20% better than typical trading companies, and the reason is boring. We cut in-house, so there is no middleman margin and no second QC pass to argue about. Rough stone goes in, graded stones come out, and rejects get caught before they ever reach a packing bench instead of after a customer complaint.

QC: Three Gates Before Your Box Closes

Every lot passes three checks. Incoming stone check confirms color band and clarity before the stone enters the job. In-process inspection catches symmetry and facet polish problems mid-run, which is where a bad round cut shows up first. Pre-ship AQL sampling happens on the finished lot, and if the sample fails, the lot does not ship.

  • Color consistency against your approved master stone
  • Roundness and table symmetry under loupe
  • Surface polish, no fire marks or scratched facets
  • Measurement tolerance on the stated millimeter size
  • Certificate numbers matched to the physical stones

Ask for the master stone photo on your first order. Keep it. Every reorder gets compared to it, and that single habit prevents 90% of color disputes later.

How to Sequence Your First Four Months

Month one, place the three-SKU stock order at 60 pieces total and pay by PayPal if you want the sample-level protection. Month two, sell through and note which size moves. Month three, reorder the winner at volume and add one new size only if the first three are clean. Month four, convert your best size into a custom 30-piece run with IGI papers if your customers ask for documentation.

That sequencing keeps your average inventory low and your reorder decisions data-driven. Buyers who skip it usually come back to us six months later trying to liquidate a size nobody wanted.

Frequently Asked Questions

What is the minimum order for lab grown padparadscha sapphire round cut wholesale?

Stock sizes ship from one piece per SKU, so you can start small. Custom cutting or color matching starts at 30 pieces per SKU, and that is where the 12-18 day production window applies.

How long does production and delivery take?

Stock orders leave in three to five working days. Custom lots take 12-18 days, then 5-8 days DDP delivery to the US or EU with duty handled on our side.

How is price calculated and what payment terms apply?

Price is quoted per carat or per piece by size, color grade and certificate type, with GRA standard and IGI optional. We take T/T with a 30% deposit on production orders, and PayPal is fine for samples.

Send me your three sizes and target grades and I will come back with a per-piece quote, a master stone photo and a shipping date, or ship you a small sample lot first so you can check the color in your own light. Reach the floor team at service@holycome.com or WhatsApp +86 133 7744 7107.

Frequently Asked Questions

What is the minimum order quantity for wholesale jewelry?

The standard MOQ is 20 pieces per design. Mixed-design wholesale lots are accepted from 50 pieces, and repeat buyers can place stock replenishment orders of 10-20 pieces per style.

How long is the production and delivery lead time?

Stock designs ship in 7-15 days. Custom and OEM production takes 12-20 days depending on quantity and setting complexity; samples are ready in 7-10 days before bulk production. Express delivery by DHL, FedEx or UPS normally takes 3-7 days to Europe and North America.

Which payment methods do you accept for trade orders?

Trade orders run on a 30% deposit by T/T with the balance before shipment. PayPal and Western Union are accepted for samples and smaller trial orders, and a written proforma invoice is issued before production starts.

Do you support OEM, ODM and private-label packaging?

Yes. We develop new designs from sketches, CAD files or reference photos, and can produce custom boxes, logo-printed tags, branded pouches and certificate sleeves. Full OEM projects start from 30 pieces per design.

Topics: lab grown padparadscha sapphire round cut wholesale, padparadscha sapphire wholesale MOQ, lab grown sapphire round cut supplier, small retailer sapphire buying plan, padparadscha sapphire SKU planning, moissanite factory wholesale, IGI certified lab grown sapphire, GRA certified padparadscha

Sourcing moissanite at wholesale?

Send us your specifications and target quantity — you will get a costed factory quotation within 12 working hours.

Request a quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Shop the guide

Wholesale items related to this guide

All products

Keep reading

Related buying guides

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Products Search Quote WhatsApp